Quick Set-up

🇩🇪 Straight alignment of the screens to be connected next to each other so that there is no vertical angle or horizontal height difference. Make sure there is no gap left.

🇬🇧 Side-by-side alignment of the screens that you choose to connect, leaving no vertical angle and horizontal height difference. Make sure that there is no gap between the monitors.

🇩🇪 Make sure that the wings are connected by the magnet and the slider is in the innermost position (as delivered).

🇬🇧 Make sure that the sashes are connected by the magnet and the slider is in the innermost position (delivery condition).

🇩🇪 Stick a wing to the vertical upper (horizontal left) edge of your screens and press it evenly with sufficient pressure for approx. 5 seconds. Now glue the second wing to the bottom (right) edge of your screens using the same procedure.

🇬🇧 Stick one wing to the vertical top (horizontal left) edge of your screens and apply sufficient pressure evenly for about 5 sec. Now glue the second wing to the bottom (right) edge of your screens following the same procedure.

🇩🇪 Rotate the front plate 90° to the left to a vertical position to adjust the desired angle. Fixing the angle by returning it to the starting position.

🇬🇧 Rotate the front plate 90° counterclockwise to a vertical position for setting the desired angle. Locking the angle, by returning to the initial position.